tutorials:hardware_hacking:ch341a
Media Manager
Media Files
Files in tutorials:hardware_hacking
- 2_breadboard_ground.jpeg
- 1920×1323
- 2019/02/03 21:43
- 795.1 KB
- 2_breaddoard_ground.jpeg
- 1920×1440
- 2019/02/03 16:36
- 852.9 KB
- 2x_jump.jpeg
- 1920×772
- 2019/02/03 16:36
- 312.2 KB
- 3_breadboard_overview.jpeg
- 1836×1256
- 2019/02/03 21:43
- 539.7 KB
- 3_breadboard_wire_overview.jpeg
- 1836×1384
- 2019/02/03 16:36
- 596.6 KB
- 3_breaddoard_ground.jpeg
- 1920×1291
- 2019/02/03 21:43
- 773.4 KB
- 3_breaddoard_power.jpeg
- 1920×1320
- 2019/02/03 21:44
- 726.2 KB
- 3_power_ground_wire.jpeg
- 1920×1136
- 2019/02/03 21:44
- 432.7 KB
- 3cm_jumper.jpeg
- 1920×997
- 2019/02/03 16:36
- 428.9 KB
- 4_cable_connect_breadboard.jpeg
- 1920×1251
- 2019/02/03 21:44
- 676.5 KB
- 4_connect_ic_test_clip.jpeg
- 1920×1516
- 2019/02/03 21:44
- 621.6 KB
- 4_data_jumper_wire.jpeg
- 1920×1307
- 2019/02/03 21:44
- 792.4 KB
- 4_data_wire_overview.jpeg
- 1013×1116
- 2019/02/03 21:44
- 222.9 KB
- 4_overview.jpeg
- 1920×1687
- 2019/02/03 21:44
- 684.9 KB
- 4x_100_ohm_resistors.jpeg
- 1920×1467
- 2019/02/03 21:44
- 590.8 KB
- 1000uf_capacitor.jpeg
- 1064×540
- 2019/02/03 16:36
- 102.9 KB
- aa_battery.jpeg
- 1920×1098
- 2019/02/03 16:36
- 482.8 KB
- atx_psu.jpeg
- 1920×1440
- 2019/02/03 21:44
- 700.3 KB
- atx_psu_test.jpeg
- 1920×1394
- 2019/02/03 21:44
- 684.7 KB
- bench_psu_test.jpeg
- 1440×1920
- 2019/02/03 21:44
- 586.1 KB
- breadboard_bottom_view.jpeg
- 1820×1642
- 2019/02/03 16:36
- 753 KB
- breadboard_top_view.jpeg
- 1920×1735
- 2019/02/03 21:44
- 844.8 KB
- cable_step_1.jpeg
- 1920×1048
- 2019/02/03 21:44
- 435.8 KB
- cable_step_2.jpeg
- 1920×1592
- 2019/02/03 21:44
- 638.5 KB
- cable_step_3.jpeg
- 1920×1197
- 2019/02/03 21:44
- 395.8 KB
- cable_step_4.jpeg
- 1123×378
- 2019/02/03 21:44
- 124.8 KB
- cable_step_5.jpeg
- 1920×1440
- 2019/02/03 21:44
- 507.1 KB
- cable_step_6.jpeg
- 1920×1440
- 2019/02/03 21:44
- 524.7 KB
- cable_step_7.jpeg
- 1920×1440
- 2019/02/03 21:44
- 545.9 KB
- cable_step_8.jpeg
- 1920×1440
- 2019/02/03 21:44
- 598.7 KB
- cable_step_9.jpeg
- 1920×1440
- 2019/02/03 21:44
- 661.8 KB
- cable_step_10.jpeg
- 1920×1440
- 2019/02/03 21:44
- 613.3 KB
- cable_step_11.jpeg
- 1920×1651
- 2019/02/03 21:44
- 621.7 KB
- cable_step_12.jpeg
- 1920×1446
- 2019/02/03 21:44
- 607.2 KB
- ch341a1_1.jpg
- 2891×2777
- 2020/03/07 15:07
- 765.7 KB
- ch341a_2.jpg
- 3910×2402
- 2020/03/07 15:07
- 885.6 KB
- ch341a_3.jpg
- 2757×2924
- 2020/03/07 15:07
- 987.9 KB
- connect_power.jpeg
- 1920×1440
- 2019/02/03 21:44
- 783 KB
- ctudak2weaes4pt.jpeg
- 1684×1428
- 2019/07/06 12:43
- 561.1 KB
- d-sub_pin-out_diagram.jpeg
- 989×684
- 2019/02/03 21:44
- 117.2 KB
- dbus-25_back.jpeg
- 1920×1423
- 2019/02/03 16:36
- 608.2 KB
- dbus-25_front.jpeg
- 1569×1163
- 2019/02/03 16:36
- 401.1 KB
- dsub-25_back.jpeg
- 1920×1423
- 2019/02/03 21:44
- 618.1 KB
- dsub-25_front.jpeg
- 1569×1163
- 2019/02/03 21:44
- 410.6 KB
- electrolytic_capacitor_safety.jpeg
- 1064×540
- 2019/02/03 16:36
- 137.1 KB
- electrolytic_capacitor_safety_vent.jpeg
- 1784×1038
- 2019/02/03 16:36
- 381.9 KB
- flash_chip.jpeg
- 1920×1440
- 2019/02/03 21:44
- 590.2 KB
- flashrom-bad.jpeg
- 1920×1440
- 2019/02/03 21:44
- 712.8 KB
- flashrom-good.jpeg
- 1920×1440
- 2019/02/03 16:36
- 797.7 KB
- helping_hand.jpeg
- 1920×1517
- 2019/02/03 21:44
- 558.4 KB
- ic_test_clip_connected.jpeg
- 1920×1440
- 2019/02/03 21:44
- 840.5 KB
- ide_cable.jpeg
- 1920×1142
- 2019/02/03 21:44
- 569.1 KB
- ide_cable_cut.jpeg
- 1920×527
- 2019/02/03 16:36
- 288.9 KB
- jumper_cable_step1.jpeg
- 1259×942
- 2019/02/03 21:44
- 276.7 KB
- jumper_cable_step2.jpeg
- 1920×1081
- 2019/02/03 21:44
- 411.7 KB
- jumper_wire_m-f.jpeg
- 1920×1636
- 2019/02/03 21:44
- 655.6 KB
- lab_psu.jpeg
- 781×1274
- 2019/02/03 21:44
- 222.1 KB
- multimeter.jpeg
- 1920×1440
- 2019/02/03 21:44
- 704.7 KB
- nvram_battery.jpeg
- 1920×1025
- 2019/02/03 16:36
- 515.7 KB
- overview_breadboard_build.jpeg
- 1930×1447
- 2019/02/03 21:44
- 682.6 KB
- parallel_port_cable_build.jpeg
- 1073×997
- 2019/02/03 21:44
- 194 KB
- parallel_port_connected.jpeg
- 1920×1440
- 2019/02/03 21:52
- 678.1 KB
- power_jumper_wire_breadboard.jpeg
- 1920×1321
- 2019/02/03 21:44
- 769.8 KB
- power_jumper_wire_breaddoard.jpeg
- 1920×1440
- 2019/02/03 16:36
- 821.8 KB
- rayer_spipgm_hardware_flasher_-_breadboard_diagram.jpeg
- 1679×2338
- 2019/02/03 21:44
- 658.4 KB
- rayer_spipgm_hardware_flasher_-_breadboard_diagram.png
- 1679×2338
- 2019/02/03 16:36
- 785.4 KB
- rayer_spipgm_schematic.jpeg
- 1920×1366
- 2019/02/03 21:44
- 359.2 KB
- rayer_spipgm_schematic.png
- 1920×1366
- 2019/02/03 16:36
- 340.4 KB
- safety_glasses.jpeg
- 1919×1440
- 2019/02/03 21:44
- 578 KB
- soic_16_clip.jpeg
- 1920×1363
- 2019/02/03 21:44
- 462.6 KB
- solder.jpeg
- 1920×1146
- 2019/02/03 21:44
- 434.8 KB
- step_4_cable_overview.jpeg
- 1920×1446
- 2019/02/03 21:44
- 607.2 KB
- tenma_60w_digital_soldering_station.jpeg
- 1920×1233
- 2019/02/03 21:44
- 496.3 KB
- wire.jpeg
- 1920×1592
- 2019/02/03 21:44
- 638.5 KB
- wire_stripper.jpeg
- 1407×838
- 2019/02/03 21:44
- 239.8 KB
![[root]](/tutorials:hardware_hacking:ch341a?ns=&tab_files=files&do=media&tab_details=view&image=tutorials%3Ahardware_hacking%3Ach341a_3.jpg){kind=link}
File
- Date:
- 2020/03/07 15:03
- Filename:
- ch341a_3.jpg
- Format:
- JPEG
- Size:
- 988KB
- Width:
- 2757
- Height:
- 2924
- References for:
- ch341a
tutorials/hardware_hacking/ch341a.txt · Last modified: 2020/03/14 12:18 by lonniemason
Page Tools
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution 4.0 International
